Unknown Recruitment is looking for a Cyber Security Engineer for our Automotive client in the West Midlands. This is an exciting opportunity either on a permanent or contract basis to join our client’s expanding UK presence responsible for Automotive Cyber Security.

Cyber Security Development Engineer responsibilities:

• Responsible for Automotive Cybersecurity; the cross-discipline approach to Vehicle Resilience will allow successful applicants the opportunity to work on the safety, security and connectivity aspects both internally and externally to the vehicle.
• Using a systems engineering approach, guide customers on specifying Security and Connectivity requirements including Over the Air (OTA) updates.
• Responsible to carry our risk assessment (TARA) on ECU’s and associated functions/features in line with ISO 21434.
• Vehicle, System and Component level Requirements Management, decomposition and Specification definition.
• Security alignment with customer and supplier management.
• Responsible for developing Cyber Resilience concepts on ECU and Vehicle level.
• Guide customers on IT and electronic engineering best practices.
• Meeting deadlines for deliverables to quality cost and time.
• Liaising with local and European technical design / engineering resources for project support.
• Coordinate cross-functional reviews for the resolution of technical issues.
• Other tasks as assigned by manager.

Cyber Security Development Engineer Requirements:

 Relevant degree or similar engineering qualification. Chartership would be beneficial.

• Knowledge of vehicle electrical and electronics architecture in particular vehicle networks.
• Knowledge of regulations/standards (SAE/ISO) and associated regulatory frameworks such as ISO 21434, SAE 3061 and UNECE WP29.
• Knowledge of software signing, secure boot and associated cryptographic techniques.
• Familiarity with cyber-security engineering; identifying threat vectors and conducting threat
• analysis and risk assessment in conjunction with functional safety engineering team.
• Familiarity with authentication, encryption techniques, key management and HSM.
• Knowledge of Public Key Infrastructure (PKI) environment for certificates and key assignment.
• Must be able to capture requirements, write technical specifications, integrate and test.
• Knowledge of security techniques defined in ISO 14229 and Autosar (SecOC).
• Strong working experience of working in the security function/s and have spent time handling security incidents and security threat management.
• Evidence of having worked at multiple stages of the V cycle using systems engineering approach.
• Experience in project management and product delivery; experience of software development and releasing would be beneficial.
• Experience of working with change management tool such as JIRA, SVN, GIT; ALM and PLM knowledge would be highly beneficial.
• You should have excellent written and verbal communication skills with the ability to translate technical language into clear, accurate terminology that non-technical people will understand.
• Able and willing to travel overseas as required by the project or company.

If interested in the role of Cyber Security Development Engineer then please contact Wilson Leung at Unknown Recruitment on +447955496036 or send an up-to-date WORD CV to wcleung@unknownrecruitment.co.uk all correspondence and conversations for the role will be treated in the strictest of confidence.

Controls Engineer Duties and Responsibilities

• Develop and code programs for PLC’s, Drives, and PC’s in order to control the various processes associated with the manufacturing of cable and report important metrics.
• Design and layout the various electrical control systems associated with cable manufacturing. Includes electrical system checkout and support during installation.
• Utilize the CAD system to design and maintain system drawings.
• Troubleshoot problems associated with the PLC’s, drives, and control systems.

Controls Engineer Educational and Experience Requirement

• Completed Bachelor’s degree or higher in related technical curriculum required with a minimum of 5+ years relevant experience in design of control systems preferred or controls engineering OR a completed Master’s Degree with 2+ years of experience in in design of control systems or controls engineering preferred
• Experience programming PLC’s and working with drives preferred
• Strong project management competency and large scale projects, preferred.
• Experience working effectively with vendors and suppliers to resolve process and component issues preferred.
• Able to function effectively in a team and self-directed work environment preferred
• Strong verbal and written communications skills, required.
• Knowledge of Statistical Process Control methodologies preferred
• Knowledge of Design of Experiments for process optimization preferred
• Knowledge of extrusion processes preferred.
• Good mechanical aptitude preferred

If interested in the role of Controls Engineer then please contact Wilson Leung at Unknown Recruitment on +447955496036 or send an up-to-date WORD CV to wcleung@unknownrecruitment.co.uk all correspondence and conversations for the role will be treated in the strictest of confidence.

The Principle RF Design Engineer will be responsible for Design of beamforming and MIMO radio transceivers and circuit blocks for 3G/4G and developing 5G systems, the ideal engineer will have solid knowledge of wireless infrastructure architectures and air interface standards including LTE and HSPA.

Principle RF Design Engineer Duties and Responsibilities:

Conduct high level design, simulation, and detailed design of wireless product RF/ mmWave section including active RF electronics and passive RF structures based on the RF subassembly requirements and RP architecture including power amplifiers, low noise amplifiers, oscillators, distributed and lumped filters, upconverters, downconverters, quadrature modulators and demodulators, RF switches, duplexers, matching circuits, phase shifter circuits, DC power conversion, sequencing, and digital control functions.

Conduct circuit analyses and simulation of passive and active circuits using Microwave Office, Keysight ADS, and HFSS to ensure compliance with requirements accounting for variations in device behavior, temperature, and power supply.

Conduct component research and selection based on defined architecture and supporting subassembly requirements while minimizing cost, power consumption, size, and weight.

Conduct RF prototype circuit and device evaluations to determine fit into RP design.

Conduct schematic capture, define PCB requirements and stack-up, coordinate PCB physical dimensioning, define optimum component placement, and support PCB layout.

Conduct engineering and DVT testing of subassemblies to ensure the functionality and performance requirements are met. Verify circuit characteristics including S-parameters, phase noise, noise figure, intermodulation, and EVM using network analyzers, spectrum analyzers, noise figure analyzers, arbitrary waveform generators, vector signal analyzers, and power meters.

Support top assembly integration to ensure full functionality and performance at the RP level.

Define sub-assembly DVT, engineering test, and production test requirements and coordinate with test engineers to develop appropriate test systems.

Support top assembly engineering test, DVT, and qualification and certification testing.

Principle RF Design Engineer Educational and Experience Requirement:

Extensive experience in cellular MIMO and mmWave RF circuit design and layout.

Detailed understanding of receiver and transmitter functional blocks and capabilities including power amplifiers, filters, duplexers, oscillators, frequency converters, modulators, and demodulators, RF switches, matching circuits, and phase shifter circuits.

Experience in behavioral and circuit simulation using Microwave Office, Keysight ADS and distributed circuit element and transition simulation using HFSS.

Understanding of transmitter and receiver impairments including sources of thermal noise, phase noise, non-linearities, PIM, group delay, intermodulation, spurious and simulation of EVM and impairment impact.

Understanding of microwave and mmW receiver and transmitter architectures and devices including discretes, MMICs, and RFICs in packaged, wafer scale, or flip chip mounting configurations.

Experience in design of distributed circuits including couplers, matching circuits, bias tees, and edge-coupled filters using multiple transmission line techniques including microstrip and coplanar waveguide across multiple substrate types including PCB and ceramic.

Skilled in thorough documentation of detailed design, analysis, and test results and presentation of design concept and test results.

Excellent verbal and written communication skills

Excellent organizational skills.

If interested in the role of Principle RF Design Engineer then please contact Wilson Leung at Unknown Recruitment on +447955496036 or send an up-to-date WORD CV to wcleung@unknownrecruitment.co.uk all correspondence and conversations for the role will be treated in the strictest of confidence.

Be part of a creative team dedicated to working for a world leading innovator, and multi-award winning designer and manufacturer of commercially deployed radar solutions. Our ground-breaking technology is utilised by clients worldwide, across many industry sectors, from Perimeter Security Surveillance and Industrial Automation, to Traffic Incident Detection on Smart Highways and as part of Intelligent Transport Systems (ITS).

Fun, friendly, and family feel. We are dog friendly and enjoy family, friends and group events. We have plenty of free parking for our employees and provide you with options to join colleagues on lunchtime walks, biking and other pursuits.

Your main tasks and responsibilities as Security Project Engineer will include:

• Planning, implementing and reporting on the progress of Security projects (including on site) to meet the project requirements. This includes production of project documentation and reports, planning, system commissioning, system optimisation, configuration, acceptance testing, and customer operations & maintenance training. This is normally performed alongside a systems integration company.
• Monitoring systems performance, diagnosing problems and proposing/implementing rectification action.
• Coordinating problem resolution with engineering, software and customer support.
• Assisting the Product Development Team with field testing of new products
• Assisting the Sales Team In performing customer demonstrations and site surveys
• Liaising with clients to identify project requirements as well as designing technical solutions in accordance to those.
• Working individually or as a team to submit technical sales and/or tender documentation to various project stakeholders in accordance to project requirements and/or tender specifications, policies and procedures.

Security Project Engineer Requirements:

• Critical thinking
• Excellent problem-solving skills
• Excellent verbal communication skills, high level of integrity and the ability to liaise confidently with the customer in a high-pressure environment.
• Good organisational skills, ability to plan own work in conjunction with team members and customers
• Self-motivated and ability to work independently
• Aptitude for quickly learning new software tools and hardware systems
• Attention to detail and good written communication skills
• Good oral presentation skills
• At least 2 years engineering experience in a project environment and customer facing role highly desirable
• Proven “hands-on” practical experience highly desirable
• Educated to HNC Level or higher in an engineering subject. (Experience can be considered in place of qualifications)
• Good IT skills, Windows, networks, basic trouble shooting.
• Valid British Or EU Passport and Current Residence

If interested in the role of Security Project Engineer then please contact Wilson Leung at Unknown Recruitment on +447955496036 or send an up-to-date WORD CV to wcleung@unknownrecruitment.co.uk all correspondence and conversations for the role will be treated in the strictest of confidence.